How To Build A Pedalboard

How To Build A Pedalboard

 

A few months ago I wrote a piece on the 4 rules to build a better pedalboard.

 

I thought it would good to go over some of the geeky stuff involved and actually show you how to build a pedalboard.

 

 

#1 Decide what kind of pedalboard you’re building

This will totally depend of what kind of gigs you’re taking. If you’re doing sessions you’ll want to build a board which is flexible, easily changeable and can be integrated with different system with effortlessly.

 

If you’re playing heavy metal in clubs which are sure to get rowdy, then you’ll want to build a pedalboard that is robust and can’t be broken! Or you’ll want to find a way to build two boards. A control board, which doesn’t matter if it gets damaged. And the other one with the actual pedals on, which is stored behind the amps – in a relatively safe location!

 

 

#2 Chose the effects pedals

This might sound dumb, but if you’re like me you kinda collect guitar effects pedals. At one point I had around 50 of them.  I’m now down to the 40 mark but still it’s a lot! I didn’t start off trying to collect them, it just happened! Well that my excuse  and I’m sticking to it!

 

Anyway, when I’m starting to build a new board, I’ll think about what I’m going to be using it for. What tones I’m after, whether I need it to be flexible both in terms of sounds and in terms of being able to add in another FX pedal or use in conjunction with an existing set up.

 

I’ll also think about the guitars and amps I’ll be using the pedal board with. If it’s for Jams, I’m will probably choose pedals that are natural sounding and work well with a load of different amps. Overdrives with a big mid hump need not apply!

 

Again I’m really thinking about this, so I’ll hopefully avoid a lot of the problems that I could have later. I’ll grab a few and do a shoot-out to find the group of pedals that really work the best together.

 

Pro Tip #1

Don’t forget a tuner. No one ever wants to play with an out of tune guitar. I like the BOSS TU-3, it’s solid and well built.

 

 

#3 Find the right signal chain

This is where the fun begins! I’ll get lost in this stage for hours. Try everything, keep moving pedals around and try every possible way of hooking the pedals together.

 

It could be a good idea to record something simple and easy to remember every time you change the signal path. So you can listen back and hear if it’s adding or taking away from your base tone.

 

After all the experimentation, write down/photograph exactly what is going on – as simply as possible. You won’t forget that way.

 

 

#4 Mark out the area you have to play with

With tape, mark on the floor the area you have to play with. You’ll need to get it exactly right or you’ll end up messing up and having to start again.

 

 

#5 Try a few different positions

Lay out the pedals on the floor and try to get them to fit in the space which you have. Then try a different layout, pretend you’re playing a gig – it is easy to click them in and out as you might need to in a real situation?

 

Is one of the pedals you use a lot hidden behind another and less used pedal? If so, try moving it.

 

Even if you prefer having certain pedals in specific spots, try moving them around. Try as many different set-ups as possible.

 

Pro Tip #2

You can always use a true bypass looper to group pedals, create insert points, or to maximise the space without hampering you.

 

 

#6 Plug In – Try It – Test It

You might want to do this for each and every set-up you think up and try out. Take photos, so you remember where it all went! Don’t worry at this point with getting the right length of cable or getting the layout to look seamlessly clean – remember to try it out. Can you hit each pedal you need to? Can you get all the tones you need? Is one of the leads a dud? Does one of the pedals have a faulty socket? Try it, test and fix it.

 

 

#7 Rough diagram

It’s good to draw a rough diagram and take some pictures. That way should it go missing you’ll know exactly what you had. It’s also good to keep track of signal chains as you could find some great tones with this board which just might be the right sounds for the next project you do – long after the board has been stripped and changed.

 

 

#8 Get the FX pedals ready

This is simple – if you’re going to use Velcro, you might want to remove the rubber of the bottom of the pedal to create a flat surface. If you’re using pedals that you have used before and they have Velcro on them, it could be a good idea to tear it off and start again. If you do this, you might want to clean the glue off the bottom of the pedal using turpentine (sometimes known as white spirit). You can use this liquid to clean the board as well if you’re tearing that back to nothing as well.

 

 

#9 Attach Pedals – Power – Cables

Attach the pedals, then the power cable. With the power cable it’s a good idea to check that no shorts are happening – you’ll know you have a short as all the pedals will turn off as there’s no power being supplied to them, if this happens, you need to start up plugging the power cables until you have lights again. Shorts can happen from within the pedal or when two bear wire touch or when a power lead touches a bear metal case.

 

Next up is the instrument cable. Now, I have a confession, I like wired cable from the guitar to the pedalboard and then from the pedalboard to the amp. On the pedalboard I like solderless cables, which take a few minutes to build.

 

Anyhow, at this point it’s time to make new cables or to reuse the ones you have if they’ll fit. So it’s time to start measuring, cutting and soldering (or screwing for those who are solderless!) patch cables for the pedalboard.

 

Pro Tip #3

My pedalboard of choice is the PedalTrain – which allows for maximum flexibility as you can run cables underneath the frame and use velco to hold the pedals [which makes it super easy to change them].

 

 

#10 Testing …..

Some more fun! Great, where did that guitar go?! Test all the pedals out, still sounding great? Should do! You might want to play for a long time, try packing up and setting up again as this will reveal a fresh set of problems like faulty input jacks, cables that have gone bad or Velcro that hasn’t been applied right and therefore has got lose. Try and find as many problems as possible.

 

 

#11 Trouble shoot

Any problems you do find, now is the best time to fix them. The WORST time to fix gear problems is at a gig when you have no time to do it properly. Make sure you solve all your problem here and then retest.

 

 

#12 Enjoy new pedalboard

We should be done! Have fun playing your new pedalboard.

Leave a Reply




Allowed tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>