NUX MOD Force Multi Modulation Effects Pedal Review
Posted: October 21st, 2016 by Ashley Saunders
The NUX MOD Force Multi Modulation Effects Pedal is a pedal that I’ve been after for some time. I wanted one as it enables me to able to simplify my set-up while having great tone.
The NUX MOD Force has 12 different types of modulation, the ability to store up to 9 presets, a kill dry function, tap tempo, and stereo inputs and outputs.
The NUX MOD Force has 12 different types of modulation effects including Chorus, Flanger, Phaser, Tremolo and Vibrato. In addition to running one sound at a time, the pedal can be set up so that it combine two sounds (e.g. chorus with tremolo) at once.
The screen allows for easy viewing of setting and indicates what each of the four control knobs do. In preset mode, the screen changes to show the number of preset in a large and easy to read font.
Build Quality: 8/10
The pedal is well built, using good quality jacks, footswitches and a metal enclosure. The screen is really easy to read in both modes – really useful in a gigging setting.
The two things to me that aren’t so great is the pots which aren’t attached to the enclosure – which if you’re likely to knock the pedal, you could snap a pot. And the power supply jack, which hovers on the back but isn’t fixed to the case. However, you can power the pedal using a 9 volt battery – which is a nice addition and can be accessed on the bottom using a plastic door.
All in all, it’s a well built and should survive some gigging abuse.
Controls and Features: 8/10
There’s a lot of control and a few that are hidden on this pedal. On the back there’s a power in and, stereo inputs and outputs. A nice feature is that you can run mono in and stereo out and use the MOD force as the stereo split.
The first row is switches:
MOD A/B – allows you to add a second modulation effect to the first and create a load more sounds.
Type – which of the 12 effect types you want to use.
Save – This button has a dual role. If you click it once, the screen will flash into preset mode and you can use the tap tempo footswitch to cycle the presents until you find an empty one to save the sound. If you hold it down for two seconds, then it activates configuration mode, which allows you to set kill dry off/on, bypass type and whether the pedals starts in preset or manual mode. Using the configuration mode, you can also select whether you would like to use all 9 presets, only presets 1 – 3, only presets 4 – 6, or only presets 7 – 9.
Subdiv – allows you to select the note value for the tempo. You can set this from a whole note to a 8th and all other increments in between.
The second row is the four control knobs, some of which control different things depending on effect type:
Speed – controls how fast or slow the effect is.
Depth – is how much effect you want.
Tweak – changes by effect type.
Mix – changes by effect type.
There are the two footswitches. In manual mode the left is on/off and the right controls the effect’s tempo by allowing you to tap the speed into the pedal.
By holding down the left footswitch for 2 seconds, the pedal switches into preset mode. The left footswitch still controls on/off. The right cycles though the presets, and thus allows you to cue up sounds.
Tones and Sounds: 8/10
There are 12 different types of modulation effects: Chorus, Tri Chorus, Flanger, Tape Flanger, Phaser, Bi Phaser, Tremolo, Stereo Tremolo, Vibrato, Auto Wah, Rotary Speaker and Uni Vibe.
For gigs, I need a chorus sounds (for 80s type stuff), tremolo and Phaser. I found that out of the two, the Tri Chorus sounds the best as does the Bi Phaser. The tremolo sound is quite cool too. As quickly as I found sounds, I was able to save them to presets, enabling me to think more about playing the gig than tap dancing!
I’ve never got how to use a Flanger sound, so they sound classically weird but I can’t seem to find a use for them. I feel the same about the Vibrato effect.
The Auto Wah and Rotary Speaker effect surprised me the most. The Auto Wah is really usable and sound phat! The rotary speaker sound is best when the controls are turn most of the way up. I’d use this sound for Jazz comping or if I was asked to get that Avril Lavigne “complicated” / early 2000 pop rock sounds.
The Uni Vibe, sounds too much like a phaser on low settings to be useful but has a more musical swoosh tone when the controls are tweaked. This effect required a lot playing with it to find a sound that would work live or in the studio.
Overall: NUX MOD Force Pedal
Is the NUX MOD Force the best modulation pedal ever? No, it isn’t. However, is it a hugely versatile and inexpensive pedal? Yes.
I half expected it to sound cheap, thin and be unusable. However, it sounds really good and is pack full of features, which are easy to use and understand. I do think this pedal is just as good as something like the TC electronic Nova Mod (no longer in production) or the modulation section of the Line6 M5 – just at a fraction of the price.
If you’re looking for a modulation pedal which covers a lot of ground, sounds good, is able to save/recall preset and is user friendly, then you have to consider the NUX MOD Force.